Iimveliso ze-escalator ze-SH FUJI, ngokuhambelana nemigangatho yangoku yaseYurophu kunye nemigangatho yaseTshayina, ukusetyenziswa kwezinto ezintsha kunye nobuchwepheshe obuphezulu bokuyila, ukuvelisa, kudibaniswa nesimbo sothando saseJamani, ukuqinisekisa iimveliso ezikumgangatho ophezulu kunye nentuthuzelo enhle.Kukho ii-engile ezimbini onokukhetha kuzo, i-35 degrees ukuba ugcine indawo yomgangatho we-elevator, i-escalator 30 degrees ukukubonelela ngenduduzo engcono yokuqhuba.

Ukuhamba Ubude: 4500-9000mm okanye inokwenziwa ngokwezifiso

I-engile: i-30 degree, i-35 degree
Inyathelo ububanzi: 600mm, 800mm, 1000mm

Umthamo:9000 P/yure

Isantya:0.25m/s;0.5m/s

1. Izinto ezikrwada

Sijonga ngokungqongqo kwaye silawule umgangatho wemathiriyeli ekrwada.

Isebe le-QC liya kujonga zonke izixhobo, xa izinto ezikrwada zisiza kumzi-mveliso, salile naziphi na iimveliso ze-cucounterfeit.Kuphela ziimathiriyeli ezifanelekileyo eziya kungena kwindawo yokugcina impahla ekrwada

.

2. Ukuvelisa ulawulo

Isebe lemveliso liya kwenza imveliso ngokomyalelo we-enginener.

Kukho i-ajenda kwiworkshop nganye ebonisa isicwangciso semveliso yonke imihla.Ngaloo ndlela, abasebenzi

Bonke bayazi ngokucacileyo ukuba yeyiphi iprojekthi evelisayo ngoku.Emva koko jonga ubume boomatshini phambi kokuba usebenze.

3. Ukupakisha

Sifaka i-plywood eqinileyo enokuma ixesha elide lokuthumela elwandle.Kwezinye iindawo ezibalulekileyo, njengekhabhinethi yolawulo,

Umqhubi womnyango kunye nemoto, iinxalenye ziya kugutyungelwa yifilimu eyomeleleyo kuqala, kunye ne-desiccant, ngaphambi kokuba ifakwe kwiibhokisi.

4. Ulawulo loMgangatho

1) Zonke izinto ezikrwada ziya kujongwa phambi kokuba zingene kwindawo yokugcina impahla.Kwaye imveliso yombane eninzi yenza uhlolo lwesampulu.Onke amalungu kufuneka abe nesatifikethi esiqinisekisiweyo esivela kubathengisi

Umsebenzi1 unoxanduva loku.

2) Emva kokuba i-elevator kunye ne-escalator iphelile, Siza kuvavanya umdlalo we-elevator motor kunye nekhabhinethi yokulawula, kunye nemeko yokuqhuba ye-escalator kunye nokuhamba okuhambayo.

I-3) Abasebenzi baya kufaka ezinye iindawo eziphambili ngaphambi kokupakisha, njengekhabhinethi / umqadi oxhasayo we-motor, ukuba kukho nawuphi na umngxuma ongachanekanga.

4) Emva kokupakishwa, siya kujonga imeko yephakheji yecandelo ngalinye, kwaye ithatha ifoto ukuze ireferensi ngakumbi.

5) Xa ukuhanjiswa, siya kujonga ukuba zonke iinxalenye zipakishwe kwisikhongozeli ukuphepha naziphi na ezilahlekileyo, kwaye sithathe iifoto ukuze ziqhubeke.

5. Emva kweNkonzo yoThengiso

1) Ukugcina i-arhente yendawo.

2) Ilungiselelwe ngumthengi.

3) Ukuba kuyimfuneko, sinika uqeqesho kumthengi.

I-4) Silungiselela abasebenzi abaqeqeshiweyo ukuba bafake kunye ne-commision.Kodwa umthengi kufuneka asazise inyanga e-1 kwangaphambili kwi-visa.